- Specs and Models
- All Features
- Dimensions
- Accessories
Specs and Models
Specifications and Models
| MODELS | PRODUCTION / 24 HRS | PRODUCTION / HR | WEIGHT |
|---|---|---|---|
| Mini 170 | 170 Gal / 645 Lit | 7 Gal / 26 Lit | 70 lbs / 32 kg |
| Mini 350 | 350 Gal / 1,325 Lit | 15 Gal / 55 Lit | 89 lbs / 40.4 kg |
| Mini 550 | 550 Gal / 2,080 Lit | 23 Gal / 87 Lit | 125 lbs / 57 kg |
| Mini 750 | 750 Gal / 2,839 Lit | 31 Gal / 118 Lit | 130 lbs / 59 kg |
| Electrical | Phase | Pump Motor | Voltage | Hz | H.P | Running Amps | Start Up Amps |
|---|---|---|---|---|---|---|---|
| Mini 170 | N/A | HP | 12 / 24 | N/A | 0.33 | 27/13.4 | 90/45 |
| Mini 170 | 1 | HP | 110 / 230 | 50 // 60 | 0.33 | 6.6/3.3 // 5.2/2.6 | 26/13 |
| Mini 350 | 1 | HP | 110 / 230 | 60 | 1 | 12.8/6.4 | 39/20 |
| Mini 350 | 1 | HP | 110 / 230 | 60 | 1 | 12.4/6.2 | 37/19 |
| Mini 550 / 750 | 1 | HP | 110/220 // 115/230 | 50/60 | 1.75//2.1 | 18.9/9.4 // 18.2/9.1 | 57/28 |
| Mini 550 / 750 | 1 | Booster | 110 / 220 | 50/60 | 0.5 | 9.4/4.7-7.4/3.7 | 28/14 |
Configuration
- Product Water Produced per hour of operation: +-15% 850 psi / 56 Bar, 77oF / 25oC & 35,000 ppm TDS typical sea water
- Salt Rejection (Chloride Ion): Minimum 99.2%, Average 99.4%
- Product Water Temperature: Ambient to feed water temperature.
- Salinity Monitoring: The salinity monitoring components of the system give a continuous readout in micromhos per cubic centimeter, are temperature compensated, and of a fail safe design.
- Salinity Range: Designed for seawater use up to 50,000 ppm TDS (Nacl) (typical seawater salinity is 35,000 ppm.)
- Temperature Range: Min. 33oF / .5oC Max. 122oF / 50oC
- System Feed Water: Flow: 50Hz, 3.5 gpm / 13.2 lpm; 60Hz, 3 - 4.2 gpm / 11.4 - 15.9 lpm
- Reverse Osmosis Membrane: High Rejection/High Yield aromatic tri-polyamind, thin film composite, spiral wound, single pass reverse osmosis membrane element.
- Chlorine Tolerance: 0.1 ppm
- pH Range: 3-11 (typical seawater pH is 8)
- System Pressure:
Feed Water
Minimum: 6 psi / .41 bar / .42 Kg/cm2
Maximum: 35 psi / 2.41 bar / 2.46 Kg/cm2
System Operation
Seawater @ 35,000 ppm & 77° F / 25° C
Nominal: 850 psi / 56.5 bar / 57.66 Kg/cm2. (Brackish varies w/ppm) - External Installation Water Connections: Pipe sizes supplied by the installer for connection of Horizon Reverse Osmosis supplied components.
Feed Inlet: 3/4" MNPT (Male National Pipe Thread, Amer. Std)
Brine Discharge: 1/2" FNPT (Male National Pipe Thread, Amer. Std)
Product: 3/8" FNPT (Female National Pipe Thread, Amer. Std)
All Features
Fresh water from a small footprint
The Seafari Mini is the perfect solution for boats with little space to spare. With the largest production capacity for it’s size, you can be sure to have plenty of fresh water, without wasting precious storage or engine room space.
Space and Power saving Design
- Available in compact or modular models that allows flexibility for those who have space restrictions
- Fits into small and complex spaces.
- Lightweight - models range from 70 to130 lbs.
- DC power option available for 170 models
Intuitive Controls, Smooth operation
- Extremely quiet, smooth, and with complete vibration isolation.
- Both compact and modular configurations have the option for remote control to operate system.
- Micro Processor Controlled Electronics provide state of the art technology and reliability with weekly Automatic Fresh Water Flush Timing (optional)
Dimensions
Compact Dimensions
| Mini 170 Compact (Front & Top View) |
 |
| Mini 350 | 550 | 750 Compact |
 |
| Mini 170 - Booster and High Pressure Pump |
 |
| Mini (350 - 750) - Booster and High Pressure Pump |
 |
Modular Dimensions
| Modular Control Panel (170-750) |
 |
| Mini 170 - Modular Membrane Assembly |
 |
| Mini (350 - 750) Modular Membrane Assembly |
 |
| Mini 170 - Prefilter and Sea Strainer |
 |
| Mini (350 - 750) - Prefilter | Sea Strainer | Oil/Water Separator | Commercial Prefilter |
 |
Accessories
ACCESSORIES AND Consumables
| Charcoal Filter Assembly | Fresh Water Flush | Plankton Filter Assembly | Remote Control Unit |
|
|
|
|
| Charcoal Filter Assembly (CFA) removes chlorine, taste, odors, and chemical impurities from the product water. This process of purification works without chemicals and leaves no residual in the water supply. | Extends the life of the membranes by rinsing them with fresh water by merely a touch of a button. The Fresh Water Flush automatically removes all salt water from internal parts of the system and flushes the membranes with clean fresh water every 7 days. This prevents salt water corrosion of the internal parts and reduces biological fouling of the RO membrane. | The Plankton Filter Assembly (PFA) traps suspended solids larger than 100 micron, thus providing additional protection for your Seafari system's pre-filters, which ultimately prolongs the pre-filter element life. | The Remote Control Unit (RCU) is able to monitor the system's performance and alarm status from the bridge or other remote locations. This RCU includes complete installation instructions and 50 feet of cable. |
| pH Neutralizing Filter | Sea Strainer | Soft Motor Start | U.V. Sterilizer |
|
|
|
|
| Extends the life of the membranes by rinsing them with fresh water by merely a touch of a button. The Fresh Water Flush automatically removes all salt water from internal parts of the system and flushes the membranes with clean fresh water every 7 days. This prevents salt water corrosion of the internal parts and reduces biological fouling of the RO membrane. | The Remote Control Unit (RCU) is able to monitor the system's performance and alarm status from the bridge or other remote locations. This RCU includes complete installation instructions and 50 feet of cable. | Charcoal Filter Assembly (CFA) removes chlorine, taste, odors, and chemical impurities from the product water. This process of purification works without chemicals and leaves no residual in the water supply. | The Plankton Filter Assembly (PFA) traps suspended solids larger than 100 micron, thus providing additional protection for your Seafari system's pre-filters, which ultimately prolongs the pre-filter element life. |
| Fresh Water Flush | Remote Control Unit |
|
|
|
| Extends the life of the membranes by rinsing them with fresh water by merely a touch of a button. The Fresh Water Flush automatically removes all salt water from internal parts of the system and flushes the membranes with clean fresh water every 7 days. This prevents salt water corrosion of the internal parts and reduces biological fouling of the RO membrane. | The Remote Control Unit (RCU) is able to monitor the system's performance and alarm status from the bridge or other remote locations. This RCU includes complete installation instructions and 50 feet of cable. |
| Charcoal Filter Assembly | Plankton Filter Assembly |
|
|
|
| Charcoal Filter Assembly (CFA) removes chlorine, taste, odors, and chemical impurities from the product water. This process of purification works without chemicals and leaves no residual in the water supply. | The Plankton Filter Assembly (PFA) traps suspended solids larger than 100 micron, thus providing additional protection for your Seafari system's pre-filters, which ultimately prolongs the pre-filter element life. |
| pH Neutralizing Filter | Sea Strainer |
|
|
|
| Extends the life of the membranes by rinsing them with fresh water by merely a touch of a button. The Fresh Water Flush automatically removes all salt water from internal parts of the system and flushes the membranes with clean fresh water every 7 days. This prevents salt water corrosion of the internal parts and reduces biological fouling of the RO membrane. | The Remote Control Unit (RCU) is able to monitor the system's performance and alarm status from the bridge or other remote locations. This RCU includes complete installation instructions and 50 feet of cable. |
| Soft Motor Start | U.V. Sterilizer |
|
|
|
| Charcoal Filter Assembly (CFA) removes chlorine, taste, odors, and chemical impurities from the product water. This process of purification works without chemicals and leaves no residual in the water supply. | The Plankton Filter Assembly (PFA) traps suspended solids larger than 100 micron, thus providing additional protection for your Seafari system's pre-filters, which ultimately prolongs the pre-filter element life. |
| Planned Maintenance Kit | Replacement Filters |
|
|
| Each Planned Maintenance Kit contains all the spare parts a cruising vessel is likely to need for basic planned maintenance. This includes all necessary pre-filter elements, screens, cleaning compound kits, pump and crankcase oil, replacement seals for the pre-filter, and a storage compound kit. | Horizon Reverse Osmosis stocks a full line of high quality standard and commercial filter cartridges to maintain both the pre and post treatment stages, as well as carbon, plankton, monel screen, and oil water separation replacement filters to guarantee system performance. |
